Standard high pressure laminate (HPL) is used on all standard work bench work surfaces, shelves, carts etc. It is very common to have a standard laminate upper or lower shelf when using an ESD work surface.

• Standard 180 degree rolled front edge used for all work surfaces, all other edges are laminated with 1mm PVC edging
• Epoxy Resin tops are 1″ thick and come with a 3/16 beveled front edge
• Phenolic resin or Trespa tops are 3/4′ thick and come with 3/16 beveled edge
• Stainless steel tops are formed over a 1.125 thick industrial particle board core.
• ESD laminate is made on the same construction as HPL tops

A solid black chemical resistant composite, thermo-fused under heat and pressure to form the entire thickness of the top. It is designed for use as counter tops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemicals or solvents.

Phenolic Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others.

Phenolic resin counter tops manufactured by Formica Corp or Trespa

FEATURES INCLUDE:

• Athlon brand is where chemical resistance is not as critical
• Toplab brand is resistant to a large number of aggressive chemicals as identified by SEFA
• All Phenolic resins have inherent antibacterial properties without the addition of microbial additives.
• Available colors are: Black, Gray, White, other colors upon request
• Black has a better lead time than other colors
• Beveled edges on all 4 sides.

Heavy wall 18 ga stainless steel
Available with wood core or clean room 100% stainless steel under core
All edges are welded to prevent any water from penetrating the wood core
Brushed finish to hide any scratches and for up keep
Steel cap is glued to wood core and is cured overnight for positive bond

Durable Epoxy work surfaces resist heat and chemicals

Epoxy designs and manufactures work surfaces and components to the highest standards of the industry. Extensive testing shows Epoxy surfaces resist discoloration, blistering, and cracking even under the harshest conditions. This extreme high chemical and heat resistance means Epoxy work surface components will appear new even after years of hard work.

The rich color and chemical resistance quality permeates the entire Epoxy work surface consistently without depending on surface coating for protection or use.

Fire Resistance, Char Resistance,  Heat Resistance

Available colors: Black or Gray, Green Blue, White

Best lead time when using Black

• Non-porous, Homogeneous material
• Material maintains the same composition throughout the part
• Water proof, stain proof
• 1/2″ thick material comes standard 30″ deep
• Hardness: 55
• Tensile strength: 4,200 psi